I have fitted Invisiframe to two bikes and have been really impressed, one matt and one gloss.
I was skeptical at first due to the cost but my son insisted on putting one on his new bike. Fitting isn’t as difficult as some people say, just take your time and never rush it. The finish is excellent and it is difficult to see the protection unless you are really looking for it. I then got one for my new bike.
I have had a rock strike on the downtube – not a mark. I leaned my bike against a wall and it got knocked against a sharp breeze block. The protects has a small mark but the paintwork is untouched – brilliant. My son has had several crashes and no marks.
The Service from Invisiframe has always been excellent and fast. I recently had to have the fork CSU replaced and Invisiframe were able to send me just the parts I needed at a very reasonable price.
After my experienced over the last 6 months I will fit Invisiframe on every new bike I get.
P. Shannon (04/08/22)
I purchased a protection kit in matte for a 2021 Revel Ranger (L). The product got from the UK to AZ in 3 days via DHL, and came rolled up in a carboard tube and had everything I needed for the install. Overall the instructions were good and the diagram labeled each piece well. Most parts were obvious and it was easy to located where it went on the bike. However, towards the end I had to take some time to find where the smaller parts went.
I think the main thing I can mention is that this process takes a LONG TIME. I estimate I spent about 8hrs applying the entire kit. Downtube was the hardest as I was doing it from beneath the bike and gravity wanted to send it earth bound. I also ended up with some bubbles on the top tube. I suppose I just neglected to squeegee well enough, as that piece has a lot more surface area than others.
Key thing is to take your time. And plan for an entire day!! My bike has a blend of gloss and matte, and I opted for full matte. I think it looks really good. Only time will tell how well the protection stands up to the elements, but I was glad to be able to install this on my frame right out of the box prior to build.
J. Turner (25/07/22)
It worked like a charm and I did the whole bike including fork in 6 hours. No bubbles, no problems at all. Some parts were a bit tricky to figure out the right spot on the bike but finally it makes all sense. Patience is the key for applying. You just have to take the time you need without any rush. The matte look on the matte paint is awesome and basically if you don’t know it, you don’t see it. The name is perfect. It’s invisible.
Thank you for this awesome product! Best regards from a happy customer in Germany!
D. Harnischfeger (22/07/22)
Really easy to fit ( with a little bit of patience ) and covers so much of the bike. I was genuinely surprised how invisible it actually is once set, it is pretty hard to see unless you are actually looking for it.
Customer service is also exceptional.
Genuinely can’t recommend InvisiFrame enough.
R. Summers (04/07/22)
Amazing service today Frame and fork wrapped to perfection.
Great to meet you Lee.
Will do more business in the future for sure.
P. Cross (17/06/22)
My invisiFRAME kit is great (IBIS RIPMO v2). I had some minor fitting issues with the top tube panel but Sarah provided great advice and kindly sent a replacement piece. Really responsive customer service and great product- I’ll be buying again!
P. Averill (18/02/22)
Picked up my transition from invisiFRAME today.
I just want to say, thank you to all of the team who has contributed to the wrap, the workmanship and finish is superior and the finish is to a high standard both dimensionally and visually and was impressed when it was rolled out to me and I know about quality products from working on OE and aftermarket aircraft flight controls.
Once again a big thankyou for the quality product I received.
P. Wright (02/02/22)
I’ve ordered several kits from Invisiframe and have been very happy with each and every one. Had one issue with damage in shipping and Sarah had me fixed up the same day!
I look forward to purchasing more kits and always refer guys/gals with new bikes.
Jay G (11/11/21)
This is only to acknowledge you of my total and amazed satisfaction.
This is the second (invisi) frame I apply on my bike (the same bike), just to refresh the look after almost two years of pretty intensive use.
Dismounting was super easy and fast (no small pieces cut, almost no glue left, safe also on the decals..)
Applying the new ones was super easy (I learnt the right mix of water and shampoo).
Amazing the speed of delivery (to Italy – the day after the order), and you also kindly added, as per my request, a second frame for the upper brace of the rear triangle,
and also added an additional patch of film.
You’re expensive, but you deserve the price up to the last penny..
C. Lusetti (13/09/21)
Just wanted to share my really positive experience. I placed an order to you yesterday afternoon and just a moment ago DHL brought the the package to my home in Helsinki, Finland. And they took care of needed custom declarations on my behalf. I was a little bit worried on possible hassle with that.
I’m really impressed and just wanted to share this with you.
A. Suokas 18/08/21
I already ordered several frame, fork and crank protection kits.
Outstanding, impressive quality with incredibly fast shipping.
The last one arrived at my home within 24 hrs. I live in Germany.
Not to forget the quick and kind response time from the support team.
Keep up the great work – thx!
P.C. Kirsch 17/08/21
I’d made my own MTB frame protection for years out of sheets of clear adhesive film. Over time it went yellow and dirt got under the edges where it had come unstuck.
I recently bought a five year old Orange MTB with the invisiFRAME kit fitted, it looked brand-new! Consequently I’ve just fitted invisiFRAME to my new eMTB. Never again will I faff about with home-made frame protection.
Superb product, and great customer service too.
Had Invisiframe frame on my bike and forks now for over 2 years so this is a long term review. What can I say, the bike still looks brand new, it’s survived crashes, Welsh Mountains and weather all year with on average 2 rides per week and being thrown in the back of a car. The Invisiframe has not discoloured, or even started to come unstuck, and has definitely protected my bike. The Invisiframe still looks like it’s only just been put on. Despite looking daunting to install, it’s actually fairly easy providing you are patient. Can’t recommend this highly enough. The customer service is as good as the product itself. 👍
D. Buckett (07/07/21)
This is the 3rd Invisiframe product I have had fitted to a bike, awesome product that was fitted to precision by Lee and customer service is second to none. I really can’t say enough good things about Lee & Invisiframe. If you want to protect your bike this is the product you need!
I cannot praise these guys enough, amazing product, amazing service absolute pleasure to deal with, so much so I purchased a second kit for a friends new Trek Rail 9.5. Lee and team you smashed it out the park. Thanks again
I. Bateman (28/05/21)
I installed the kit on my Canyon Ultimate and it worked well. Great product quality, thank you.
F. Mingazhev (30/04/21)
This is the 4th set of protection I have used from Invisiframe. Really like the product.
There are some pieces that I have trimmed just to make them easier to fit but the quality of the product is great. If you trim them use small scissors and round the edges as opposed to a point so they will not lift off. I could not get them ordered online so contacted Sarah and Megan and they are both very helpful and got the product delivered in two days. Its best to put them on a bike before you ride it as cleanliness is paramount.
S. Middleton (14/04/21)
I contacted Invisiframe by email for a kit for my new 2022 Levo Pro, I had a reply from Lee on Saturday morning to say he would need to template first with it being a new model and he booked it in ASAP. Absolutely delighted with the finish and the Invisiframe product, first class service too, Lee couldn’t have been more helpful or accommodating.. Well worth the 360 mile return journey.
P. Warwick (11/04/21)
Have had for bikes fitted with invisiframe over last few years. Always found it a great product that offers fantastic protection for my bikes. I also found it a plus point when I sold bikes on.
I had a major problem with a local bike shops attempt to fit invisiframe. I contacted Lee and he went out his way to help me in super fast time
C. Fitzpatrick (24/03/21)
Highly recommended and fantastic product.
J Ramshaw (22/3/2021)
In terms of fit etc I had a very similar experience with the reviews posted this far. However, I did misinterpret the orientation of a section and emailed invisiframe to query, I received an email acknowledging that it was being looked at and within a few hours I had a personal email from Lee and he provided me with his number and kindly talked me through the issue and gave me the solution. I must add that this was well into the evening and outwith working hours in the UK. It made me feel like a truly valued customer and their dedication and help in ensuring a quality application is a testament to their work ethic and company values.
C. Donnelly (16/03/2021)
Bought the Trek Top Fuel 7/8 XL kit. Received in 5 days in Indiana, US. Has taken three evenings to install, about 2 hours each time. Realized my kitchen with 10 can lights in the ceiling was the best place to work with the bike in my stand. I will repeat the best advice, “Squeegee, squeegee, squeegee, squeegee, squeegee…”. I found keeping it wet and continuing to squeegee and looking from different directions I had few bubbles or edges to work on next day.
The kit is perfect, fit is spot on, and install is simple enough taking your time. It is the best $125US I have spent to protect my $3,000US Trek Top Fuel 7 SX XL. I am going to order generic frame kits for my wife and my Trek Marlin 6s to install, same with forks. I have both my vehicles protected with XPel Paint Protection Film too.
InvisiFRAME is going on every bike we get, now I just have to get InvisiFRAME to size a Trek Powerfly FS Medium frame.
M. Fuellng (20/02/2021)
Great product, great customer service, what more could you ask for. Thanks Invisiframe
J. Lambe (14/02/21)
Great product, even better service – I fudged installing one of the sections and they sent me a replacement piece no questions asked. Just remember to book the day off work to install a full kit and have plenty of tea and biscuits on stand by 🙂
I just like to say a massive thank you to lee and staff at Invisiframe, lady’s on reception were very professional top draw. Met Lee what a great guy and done a great job I can’t thank you as a company enough 👍
I really don’t have enough words for this company. Superb communication, excellent support, friendly and supportive. Nothing more could someone ask for!
Super fast delivery and awesome quality of the product. Not only highly recommended but a model for every other company.
Thank you for everything. I will definitely be buying all my future frame protections from you!
Andreas Apostolopoulos (15/01/2021)
Having recently ordered invisiFRAME frame protection and decals for my bike, I was totally blown away not only by the quality of the product but also the unbelievable service I received. All my questions were answered promptly and the delivery was super fast. I am truly impressed!
Justin Navetta (18/11/2020)
I ordered the protective warp for a frame and fork last week from México, Im very surprise how fast i got all the package, time to install the kit
César Luna (06/11/2020)
I placed an order with you several months ago, finally got my new bike, and having followed the detailed instructions and YouTube video I applied the kit to the frame of my Whyte S120.
It went on like a dream, no bubbles, very few issues and strangely therapeutic!
Bike looks fantastic, frame coverage is great and I’m really happy with the end result.
Keith Roostan (23/03/2020)
After I purchasing my new bike I jumped on to invisiframe website to order a kit as I have had it on previous bikes and loved it, only to find out there was no kit available. ?
After a speaking to Vicky on the phone was told there was no kit available yet but if I could get my bike to them they would design and fit one for me. Dropped my bike off to them on Friday, received a warm welcome from Lee on arrival. Went through everything I wanted done and was told it would be approx 1 week turnaround so was very shocked to receive an email on Monday afternoon saying the bike was finished. Collected my bike on the Wednesday and was met by Vicky who led me in to see the bike. I am well impressed with the work they have done. In little over 48hrs they had designed and fitted the protection kit to the bike, front forks, cranks and hubs. Very high quality work in super fast time scale and very nice to deal with from start to finish. I honestly can’t recommend them enough. Superb service, great people. I certainly won’t be going anywhere else from now on. I will be bringing every bike I have to you in the future.
Thank you for everything guys been amazing
R. Parsons (16/01/2020)
I purchased the invisiframe kit for my Trek Rail. Fast delivery and the kit is superb, every piece fits absolutely perfectly making fitting a breeze. Stick to the instructions and you can’t go wrong. Unless you know where the edges are it is actually invisible in the gloss finish. Wish I’d bought kits for my other bikes before I had ridden them. Would recommend to anyone, 11 out of 10!
S. Wilkinson (08/01/2020)
Sent my bike to Invisiframe to have the kit fitted and I’m over the moon with the result. The finish is second to none! Their customer service is fantastic and I would highly recommend to anyone considering getting one of their kits. Cheers guys
Finally got a bit time to put part of the Invisiframe on my bikes, some for the Brompton some for my old road bike. I thought to tell you that the protection film is one of the top 3 films I’ve ever used on many different things, absolutely amazing and the cut of the films was very precise as well – it’s def. worth the price. The installation was pretty straightforward and easy too (in the sense compare to modelling and spray painting).
Thank you for the great product and the customer service!
Fan Lo (12/10/2019)
Kit ordered at 08.20 am on Monday, delivered by 09.00 Tuesday! Excellent service and great quality. A*
Gareth Hernaman (17/09/2019)
Invisiframe is an excellent product, I received it in just two days in Peru. Definitely the best of the best.
Jose Davila (10/09/2019)
Fantastic service with a fantastic product to match. For an novice installing this on my new Hightower LT frame, apart from a slow start I was surprised at once I hit the knack of it, how easy it was! Time consuming took approx 4hrs 45. The thing is is does was it says on the Tin, the individual stickers are cut to perfection you won’t find a better system. Extremely impressed, matched with the service they offer, wow! Impressed! Thanks again.
Lian Rigby (23/08/2019)
I received the kit for my Ripmo in the US in 2 days. I was impressed with how fast you shipped it out. I watched the video and was somewhat nervous about doing the application. I followed the instructions, made my plan and applied the first piece. Not only was the fit perfect but the process went much easier than anticipated. 3 hours later, the bike was complete. No lifted edges, bubbles or other blemishes. You have a great product and a new loyal customer.
I bought the gloss kit for my Vitus E-Sommet and after spending about 4 hours applying the kit, it looks brilliant! The main thing is, I know that the gloss finish will last now. I applied a Matt finish kit to a previous bike and after 2 years it still looks like new. These kits stop all the abrasion on those muddy, wet days. Buying another kit was a must for my new bike, seeing as the previous one lasted so long. The way they’re cut to fit is amazing, following all the lines of the bike. I would highly recommend these frame kits.
Keith Johnson (30/05/2019)
Today I visited invisiFRAME in order to get my new MTB frame protected, Not sure quite what to expect it was a long way to travel but the reviews of Lee’s work were very good. On arrival although a little late I received a great welcome, Lee also took the time to point out local attractions. Three hours later I returned to collect my bike, I was amazed by the standard of Lee’s work that far outweighed my expectations, Lee is clearly a perfectionist and the bike looked superb. Nothing was too much trouble despite his very busy schedule. My thanks to Lee and his small team for a first class job. Highly recommended a real craftsman.
Joe Aggett (18/07/2019)
I got the wheel decals for my 2019 Levo carbon comp and the quality and colors are brilliant and made my bike look amazing. Least expensive modification I have ever done to a bike and the results are way beyond anything I have ever done in the past. You want to bring your bike to life? Quality decals will do just that.
Paul Horak (15/05/2019)
Absolutely love this stuff! Took me over 4 hours to apply, but the results are awesome! Cured clear and strong. I wish I had known you existed before wasting several hours and over $50 on helitape that just wouldn’t stay down. For a complete bike, your kits are an undeniable value. Will definitely buy again and highly recommend.
Devon Mount (10/03/2019)
Really pleased with the results having fitted invisiFRAME to my Bronson. Having watched a couple of uTube videos I knew it was going to take a while but it was well worth the effort. The shapes are all cut out very precisely for a perfect fit and the coverage is good – just follow the instructions very carefully! Great service too – ordered Sunday evening, delivered to Aberdeen on Tuesday morning.
Richard Woollcombe (06/03/2019)
I contacted Lee & Vicky to say that my Yeti SB95C was due to arrive, even though i knew that they didn’t yet have the template in stock. I brought my bike up to their house on the agreed day and Lee said it would take about 8 hours of effort to create. I arrived the following evening and was welcomed into the house to see my new frame on the work stand under a light, where i was invited to inspect the work. I’m sure some people think this is relatively easy work to achieve this, but trust me, the craftsmanship in creating the template and then applying it was incredible and i was blown away by the result. i know that Lee has worked late into the evening to make this happen for me and i was completely delighted. Would I buy from Invisiframe again? Oh Yeh!
“Just wanted to say how impressed i am with the kit and the installation, worth every penny!”
“If you’re wanting to protect your pride and joy, then just Invisiframe it, you won’t get a better job than this kit. As they didn’t have my Giant Anthem in a large frame size, I had to send it down to Lee & Vicky to get measured up. I was anticipating it being away for at least a week; not so. The day after it had arrived, I received a message saying it was done. I had to admit I was curious as to how well the job was given it was only away for a short period of time. It was perfectly wrapped; no air bubbles or voids to speak of (this was even after I had used the bike and put some scratches/blemishes on the paint). It wraps perfectly around all the features on the frame. You genuinely won’t know its there unless you’re looking for it. Would I use them again? Definitely! I would send any new bike to these guys by default before it’s even been used. Thanks again Lee & Vicky.”
“Wow, it’s an amazing job, very pleased with what you have done! It amazes me how such a clean job has been done to a new frame with no template! Have shown many people in the office and they are impressed, I’ll be sure to recommend you to others”
Looks like we have just become stockists for you guys which is excellent, Been using your kits for a while and loving it!
Picked up the frame from Jim last night and i’m very impressed. Thanks very much for doing it and with such a quick turn around
“Hi Lee/Vicky I have received my invisiFRAME order for the Evil Uprising in Greece, yesterday. Very impeccable work indeed, the mechanic on my LBS told me it is the best 3M bike frame protection kit he has seen to date, for any bike! Excellent detail and top quality. Thank you very much indeed.”
“Outstanding attention to detail and finish! The Demo 8 has more curves than my wife and almost as attractive 😉 The kit looks amazing and really is a work of art! If I didn’t love riding her I would seriously enter this work into a gallery. You have to look very closely to see the tape lines, although they’re so perfect and neat it’s almost a shame you can’t see them! Highly recommended. Many thanks.”
“Contacted Lee to check he had a kit for my new frame, it was duly dispatched and arrived bang on time. As with all the kits i have ordered this one for a WHYTE 905 was spot on and cut perfect. Took me no time to fit it with the easy to follow instructions and the bike looks amazing. The clue is in the title its (almost) invisible. Lee and his team are so helpful and friendly, earlier on this year they didn’t have a template for my new 2016 Banshee Legend, not an issue, sent frame to them , it was designed and fitted with no fuss at all. I use this bike for DH so it gets a good battering but the kit remains as perfect as the day it was fitted. Want to keep your bike in showroom condition, order a kit, its even quite therapeutic fitting it :)”
“Couldn’t be more happy with my experience. Ordered on a Mon received Tuesday! I set 4 hrs aside as they recommended. As nerdy as it sounds I took great satisfaction in fitting the product. I took my time with a case of beers and some tunes on and completed it in 3 hrs without a moment’s frustration. It really is as forgiving as it looks on the video. Every part of the bike is covered and fitted to a fraction of a mm and just floats nicely into place. These guys have really put some effort into the design of these kits! If you’re one of these guys who wants to slap it on in an hour, forget it and pay a fitter to do it. And the creme de la creme. I managed to mangle the top tube piece when I clamped it in my bike stand. After crying myself to sleep I dropped them an email to see if they could sort me a spare top tube piece. Totally my fault but these guys have supplied me a replacement at a very reasonable price when I expected to have to live with it or buy a whole new kit. All in all an excellent product from genuine guys who excel at customer satisfaction!”
I contacted Lee a few months ago about getting a XL kit for my Intense Tracer 275C. I had the bike on order and the kit was not cut yet…..one was coming into his shop soon……so I waited; since I didn’t have my bike yet, no big deal. I get a email a month or so later telling me that he got the bike to do the first template and they would have them in stock. so stoked!!! my bike came in, I ordered the kit on a Fri and it arrived across the pond on Mon!!! kits were easy to understand. took some getting used to with fitting but if you follow the instructions that come with the kits and take your time, you should be good. I did the frame, Fox34 fork and my shimano cranks. they came out great. haven’t gotten the bike out on the trails yet, so I can’t give feedback on the durability but the fit and finish of the product is top notch!
Kit arrived for my Cotic Soul very quickly and was easy to fit – very hard to see the tape edges once on and conformed very nicely to the curves of the frame. Fitting has an oddly calming effect too. Was so good I ordered a kit for my Sherpa, a blank for my M109 and some decals for my cranks to prevent them getting scratched up. After sales service and support is also excellent when I had queries. Highly recommended.
We bought a fork and frame kit for my lad’s YT Tues at the end of last year. After a full season of BDS and Pearce races, and a trip to the Alps chucked in, the bike is still looking mint. Great kit and just about to buy another set for a new bike. Cheers.
“I sent an email on a Sunday looking for a Nukeproof Pulse 2017 invisiframe kit expecting to hear back on the Monday, I was amazed to get an email back within the hour with good news that they had a kit but it wasn’t yet on the website, Lee asked a few questions and then put the kit on the shop website ready for purchase. Great and within 2 days the kit arrived and when fit looks great. I will be recommending their service to all my friends and will use again myself. Thanks Lee.”
Well recommended for everyone !!!!!!
“I’ve purchased 3 kits thus far, for 3 different bikes. These are just fantastic, and fit perfectly. Put in the time/patience, and you will get spectacular results. With the industry going to carbon frame bikes, paint doesn’t bond as well (as aluminum). These kits can also be helpful, in the event of a light \lay down\”
This is the second kit I have purchased off the Invisiframe team and it is second to none. It really is almost invisible on my gloss Jawbreaker coloured Enduro frame. The customer service is on another level compared to other internet sellers. Super quick delivery and fast responses to email queries. I ruined a section of the kit trying to get some air bubbles out (my fault entirely) and Lee sent me a replacement piece which arrived the next day. What more could you possibly ask for?
Easy to use website. Great kit, great service- kit arrived very quickly and is of superb quality, coupled with fantastic after sales support – I had a couple of questions that Lee turned around impressively quickly and out of hours. Highly, highly recommended.
“Super impressed with the quality of the kit I’ve just did to my new Whyte T130C. It was so much easier to fit than I expected and now it’s on I can only see if when I look for it. Customer service is top notch too. A rogue bit of dust put a bubble on the top of my top tube so I was not happy. I emailed (at 10pm) to enquire about a spare piece and expected an email back in a few days. Seriously surprised and impressed to find an email in the morning with an offer to provide the spare at low cost. Just watch out for that pesky dust!”
User friendly proctector every rider must have to protect frame and fork from debries!
I got my Orange 5 sorted recently through Invisiframe and its brilliant! The finish is amazing and does what it says on the tin, its invisible! Great, friendly, fast service. A must for any one serious about bikes. I will be recommending far and wide!!
Fit the kit myself on my Giant Reign Advanced. Had a couple of concerns before fitting. Called me back in no time and answered my questions. The individual pieces are cut to size perfectly and the fitting instruction video is a great help. I would definitely recommend these frame kits. Excellent customer service.
“Ordered two Ibis kits, one for my SLR and the other for my HDR – The attention to detail of the kits are first class and I can only wonder why I have never fitted these kits before! Any new steed that I will get in the future will with out doubt have an Invisiframe kit fitted to it . Lee/Vicky – thank you and keep up the good work!”
The kit fitted perfectly (2015 Orange Alpine 160) and, after nearly 2 years abuse, is still looking great. The material used does not ‘yellow’ with age unlike similar looking products. It comes bike specific, so there is no waste, or cutting required, and is easy to fit. Invisiframe were excellent to deal with. Prompt delivery, and professional service. Make sure you also order the fork kit and crankarm protectors, worth every penny.
I received my first invisiframe kit last year for my 2016 Salsa Carbon HorseThief X01. I couldn’t believe how much detail went into the design of this kit and how well it protected the bike. Kit outlasted the bike. I broke my frame after four months. Got a replacement frame from Salsa and ordered another kit from Lee. Second time is a charm and worth the piece of mind. Broke that frame three months later. Gave the HorseThief platform the boot and bought a new Specialized S-Works FSR. Sent Lee a email and ordered another invisiframe kit. And again I’m impressed by the quality and figment of these kits. Bike shops should offer these things to their customers as package of some sorts on high end bikes. Just bought a Salsa Warbird today and going to send email to Lee and see what he can do for me on a kit for it. And I can’t say enough good things about their communication and fast shipping to the US. I’m impressed all around!
“Really pleased with the frame kit for my Pivot Switchblade. As they’d not done a Switchblade in my size before I sent off my brand new pride and joy to Lee who custom made the kit and fitted it for me. He even added an extra section inside the chain stay to protect against damage I’d seen from the rotor on the demo bike I’d borrowed. I picked the bike up from Vicky who is super friendly and helpful. If only every small business was like this, thanks guys !!”
Bought my first Invisiframe for my new Trek Fuel EX. Good protection for the bike and has held up really well. Fast delivery and easy application to the bike and the result was very nice even for being the first time for me to this kind of thing. Decided to buy another invisiframe for another new bike. Again super fast delivery for the second one as well but this time the shipping company totally trashed the package beyond recognition somewhere along the way and the content (the invisiframe) was so torn it was not usable. E-mailed to ask if there was anything I could possibly do or if the shipping company could fix this. Vicky told me they would take care of it and sent me a replacement order immediately, and this time the shipping company succeeded and the order arrived safe and sound. Awesome product, awesome customer service, awesome everything!
Had my new Rose Pikes Peak shipped directly from Germany to have Invisiframe design a kit for it. This is, by quite some margin, one of the best decisions I’ve made in a long time. The kit is flawless, it matches the fit and finish of the frame exactly and is almost undetectable unless you run your hand over it. If you take any pride at all in your bike, no matter how much you’ve spent on it, an Invisiframe kit is a must.
“Well Lee you did it again and my Orange Five is all ready to go without the worry of marking the frame, forks or crank thanks to your kits. Canâ€™t understand why you wouldnâ€™t get your new bike fitted out before you head out.”
Absolutely over the moon with 3 decal products I’ve ordered. I ordered later on a night and had a reply about which colour i wanted within minutes. Unbelievable service and superb quality product. Changed the look of my bike for the better. Will definately use again.
“I ordered the wrong product, completely my fault, but the help I got from Nathan and Invisiframe was just superb. The product is also pretty excellent, so all in all Invisiframe Rock’s.”
Great service and product, my frame size wasn’t stocked but I left my lovely new bike in Lee’s capable hands and collected it two days later. It looks fantastic and I can now relax that it is as protected as it can be. Highly recommended. Happy rides!
Im very happy with the Invisiframe installed on my bike. Cannot recommend the product or company enough. Donâ€™t think twice about it you will not regret the investment.